Vertical Cylinder - High End Systems Axon HD User Manual

Vertical Cylinder

When you select the Horizontal shape, you
can set the following:
Select Inside Surface if you want to display
the sphere as a concave surface.
You can choose the x, y and z coordinates as
the cylinder's centerpoint.
Define the Longitude to choose a portion of the cylinder.
Vertical Cylinder: Default Geometry
Note: Once you click New, the Curved Geometry options cannot be
changed unless you click Reset and start a new Cylinder mesh.
6
Vertical Cylinder:
Centre [x],[y],[z]
Longitude (Deg) Start
1 1 0
75.00 End 105.00
Axon HD CMA Warp Editor