Editing Fields
This section describes the editing fields from the left panel of the Warp Editor screen in detail.
Geometry Editing Fields
Several primitive shapes in the drop down
field are available as a starting point for your
Warp file. The Geometry section of the
Editing bar lets you select and configure your
starting mesh.
Rectangular Grid
This shape has now configuring options.
Simply click on New to establish a rectangular
mesh.
Spline Rectangular Grid
After selecting the Spline Rectangular Grid,
set the number of Bezier Control Points for
both horizontal and vertical from 2 to 6. Set
the Bezier Grid Resolution to determine the
smoothness of the bezier curve. Then click
New to create the mesh.
Note: Once you click New, the number of Control Points and Grid Resolution
cannot be changed until you create another Spline Rectangular Grid.
Axon HD CMA Warp Editor
3