Sphere - High End Systems Axon HD User Manual

Sphere

When you select the Sphere shape, you can
set the following:
Select Inside Surface if you want to display
the sphere as a concave surface.
You can choose the x, y and z coordinates as
the spherical mesh's centerpoint.
Define the Latitude and Longitude to choose a portion of the sphere.
Sphere Default Geometry
Note: Once you click New, the Curved Geometry options cannot be changed
unless you click Reset and start a new Sphere mesh.
4
Centre [x] [y] [z] 0.0
Latitude (Deg) Start 65.00
Longitude (Deg) Start 75.00
0.0 0.0
End 115.00
End 105.00
Axon HD CMA Warp Editor