Camera Options
The Camera Options field lets you select the
way you want to view the editing grid. The
perspective view is the option most associated with sketching. An orthographic gives a
typical drafting view with no perspective indication.
Centre of Operations
When you drag a set of control points to shape
the mesh, you can reference the change to
the center of the figure or to the center of the editing points you have selected to move. In the
example below, 12 control points were selected and scaled down. The grid on the left shows the
result with the Centre on Figure option selected and the figure on the right shows the result
when Centre on Selection is selected.
Rotation
You can rotate a selection of control points in
the x, y and z direction.
First, set the degrees of rotation for each step
from .01 to 359. Then you can press the corresponding button to increase or decrease the
rotation for X, Y or Z
Rectangular Grid with control point selected.
Axon HD CMA Warp Editor
Rectangular Grid with selection rotated 60.00 in the
Y- direction.
9