Force Warp Output/Checkerboard
Force Warp Output allows you to see a warp
output while actively modifying it.
Note: Be aware that Force Output has the potential to override the output of
the control board.
To display the warp-edited output:
1. With the warp editor enabled, select the
file from the File Name drop down field
to view in the editor. These files are
available for recall from the control desk
at a later point.
2. To display the selected file on Output 1,
select the same file from the drop down
list, and select force output. The image
that is being displayed is being affected
by the warp grid.
3. Make changes as needed to the warp by selecting control points, editing, and deselecting.
Note:
The map is updated when you let go of the mouse button after
dragging, ie. on mouse-up unless continous update is selected.
The Checkerboard is a test pattern view
that can be selected for in Small, Medium,
or Large format to aid in creating your warp.
14
Axon HD CMA Warp Editor