Film Burn/Unburn - High End Systems Axon HD User Manual

CHAPTER 11
Effect Mode Options Descriptions

Film Burn/Unburn

Effect Mode parameter DMX value = 93
This effect creates multiple burn patterns over the image.
Modifier 1: Adjust the burn-through rate. A DMX value of 65 begins creating a burn pattern with
flames from 64 = slowest to 127 = fasted rate. Values below 65 "unburn the pattern from 63 =
slowest to 0 = fastest unburn. Values in the upper half of the range create the burn pattern
without flames from 192 = slowest to 255 = fastest burn rate. A value of 191 "unburns" the
patterns from 191 = slowest to 128 = fastest "unburn" without flames.
Modifier 2: Adjusts the amount of film blackening around the burn areas from 0 = the smallest
amount of blackening to 255 (100%) = the largest blackened area.
Modifier 3: Each DMX value selects one of 255 burn patterns.
Original Content
146
Object Effect
Modifier 1 parameter DMX = 152
Modifier 2 parameter DMX = 234
Modifier 3 parameter DMX = 211
Axon HD Media Server User Manual
Global Effect