Film Noise - High End Systems Axon HD User Manual

Film Noise

Effect Mode parameter DMX value = 94
This effect creates the effect of scratches on film. You can adjust the amount of "noise" as well as
the tint and "jitter" to give the image an aged film effect.
Modifier 1: Adjusts the noise rate. A DMX value of 128 (50%) pauses the noise. Values below
the midpoint adjust the rate from 0 = fastest to 127 = slowest. Values above the midpoint adjust
the rate from 129 = slowest to 255 (100%) = fastest.
Modifier 2: Shifts the color to a sepia tint, 128 = no adjustment, 0 to 127 = full sepia. Values
above the midpoint of the range repeat the push to sepia with jitter added from 129 (51%) = full
color and no jitter to 255 (100%) = full sepia and maximum jitter.
Modifier 3: Reduces the noise level from 0 = maximum noise to 255 (100%) = no noise.
Original Content
Axon HD Media Server User Manual
Effect Mode Options Descriptions
Object Effect
Modifier 1 parameter DMX = 157
Modifier 2 parameter DMX = 94
Modifier 3 parameter DMX = 26
CHAPTER 11
Global Effect
147