Cone - High End Systems Axon HD User Manual

Cone

When you select the Cone shape, you can set
the following:
Select Inside Surface if you want to display
the sphere as a concave surface.
You can choose the x, y and z coordinates as
the cone grid's centerpoint.
Define the Latitude and Longitude to choose a portion of the cone.
Cone Default Geometry
Note: Once you click New, the Curved Geometry options cannot be changed
unless you click Reset and start a new Cone mesh.
Once you have selected the Geometry and click on New, the mesh being edited will be included
in the display with control points indicated as black dots.
Axon HD CMA Warp Editor
Cone:
Centre [x],[y],[z]
Longitude (Deg) Start
0 0 0
75.00 End 105.00
7