Terminal - Motorola RFS7000 Series Reference Manual

11.1.11 terminal

MAC Extended ACL Config Commands
Use this command to set the length or number of lines displayed
Syntax
terminal(monitor|no)
terminal no(monitor)
Parameters
monitor
no
Usage Guidelines
By default, log messages are generally not displayed over a Telnet session. Use the
command to view t log messages using Telnet.
Example
RFS7000(config-ext-macl)#terminal monitor
RFS7000(config-ext-macl)#
RFS7000(config-ext-macl)#terminal no monitor
RFS7000(config-ext-macl)#
Copies debug output to the current terminal line.
Negates a command or sets defaults.
• monitor – Copies debug output to the current terminal line.
11-17
terminal monitor