Show - Motorola RFS7000 Series Reference Manual

11.1.10 show

MAC Extended ACL Config Commands
Use this command to view current system information.
Syntax
show<paramater>
Parameters
?
Usage Guidelines
The command displays the access lists configured for the switch. Provide the access list
show access-list
name or number to view specific ACL details.
Example
RFS7000(config-ext-macl)#show ?
access-list
alarm-log
autoinstall
banner
boot
clock
commands
crypto
debugging
environment
file
ftp
history
interfaces
ip
ldap
licenses
logging
mac
management
mobility
ntp
password-encryption
privilege
radius
redundancy-group
redundancy-history
redundancy-members
running-config
securitymgr
sessions
snmp
snmp-server
startup-config
terminal
timezone
upgrade-status
users
version
wireless
RFS7000(config-ext-macl)#show
Displays the parameters for which information can be viewed using the show
command.
Internet Protocol (IP)
Display all alarms currently in the system
autoinstall configuration
Display Message of the Day Login banner
Display boot configuration.
Display system clock
Show command lists
crypto
Display debugging setting
show environmental information
Display filesystem information
Display FTP Server configuration
Display the session command history
Interface status and configuration
Internet Protocol (IP)
ldap server
Show any installed licenses
Show logging configuration and buffer
Media Access Control
Display L3 Managment Interface name
Display Mobility Parameters
Network time protocol
password encryption
Show current privilege level
Radius configuration commands
Display redundancy group parameters
Display state transition history of the switch.
Display redundancy group members in detail
Current Operating configuration
Display debug info for ACL, VPN and NAT
Display current active open connections
Display SNMP engine parameters
Display SNMP engine parameters
Contents of startup configuration
Display terminal configuration parameters
Display timezone
Display last image upgrade status
Display information about terminal lines
Display software & hardware version
Wireless configuration commands
11-15