Rad-User; Service - Motorola RFS7000 Series Reference Manual

13-14 Overview

13.1.7.9 rad-user

RADIUS Configuration Commands
Use this command to add an exisitng RADIUS user to this group.If the RADIUS user is not available in the
Onboard RADIUS server's database, create a new RADIUS user using
mode. For more details
radsrv)
Syntax
rad-user
Parameters
WORD
Example
RFS7000(config-radsrv)#rad-user user1 password user1
RFS7000(config-radsrv)#group group1
RFS7000(config-radsrv-group)#rad-user user1
RFS7000(config-radsrv-group)#

13.1.7.10 service

RADIUS Configuration Commands
Use this command to invoke RADIUS service commands, if they have been stopped. This command is used to
enable the RADIUS Server. A service RADIUS restart is executed only from the
Syntax
service (show) (cli)
Parameters
show (cli)
Example
RFS7000(config-radsrv-group)#service show cli
Radius user group configuration mode:
+-clrscr [clrscr]
+-do
+-LINE [do LINE]
+-end [end]
+-exit [exit]
+-group
+-WORD [group WORD]
+-guest-group
+-enable [guest-group enable]
+-help [help]
+-no
+-policy
+-day [no policy day]
+-time [no policy time]
+-vlan [no policy vlan]
+-wlan
+-<1-256> [no policy wlan (all|.<1-256>) ]
+-all [no policy wlan (all|.<1-256>) ]
+-rad-user
+-WORD [no rad-user (all|WORD)]
+-all [no rad-user (all|WORD)]
+-policy
+-day
+-all [policy day (all|weekdays|{mo|tu|we|th|fr|sa|su})]
+-fr [policy day (all|weekdays|{mo|tu|we|th|fr|sa|su})]
check13.1.13 rad-user
Existing RADIUS user name.
Shows running system information.
command from
rad-user
on page 25.
config
(config-
mode.