14-6
Overview
14.1.4 broadcast-tx-speed
Wireless Configuration Commands
Use this command to configure the rate broadcast and multicast traffic must be transmitted between the
switch and mobile units.
Syntax
broadcast-tx-speed(range|throughput)
Parameters
range
throughput
Example
RFS7000(config-wireless)#broadcast-tx-speed range
RFS7000(config-wireless)#
RFS7000(config-wireless)#broadcast-tx-speed throughput
RFS7000(config-wireless)#
Uses the lowest basic rate. Provides maximum range.
Uses thhighest be asic rate. Provides maximum throughput (default).