Motorola RFS7000 Series Reference Manual page 320
Rf switch
Hide thumbs
Also See for RFS7000 Series:
- Reference manual (732 pages) ,
- System reference manual (466 pages) ,
- Troubleshooting manual (60 pages)
Table of Contents
Advertisement
9-16
Overview
permit {icmp}
{source/source-mask |
host source | any}
{destination/ destination-
mask | host destination |
any}
[icmp-type |
[icmp-type icmp-code]]
[log]
[rule-precedence access-
list-entry precedence]
Use with the
command to allow icmp packets.
permit
• permit – Action types on an ACL.
• {icmp} – Specifies icmp as the protocol.
• {source/source-mask | host source | any} – The keyword source is the
source IP address of the network or host in dotted decimal. Source-mask
is the network mask. For example, 10.1.1.10/24 indicates the first 24 bits
of the source IP are used for matching.
• any is an abbreviation for source IP of 0.0.0.0 and source-mask bits
equal to 0.
• host is an abbreviation for exact source (A.B.C.D) and source-mask
bits equal to 32.
• {destination/ destination-mask | host destination | any} – The destination
host IP address or destination network address.
• [icmp-type |icmp-type icmp-code] – ICMP type value from 0 to 255. Valid
only for protocol type icmp. ICMP code value from 0 to 255. Valid only
for protocol type icmp.
• [log] – Generates log messages when the packet coming from the
interface matches the ACL entry. Log messages are generated only for
router ACLs.
• [rule-precedence access-list-entry precedence] – Integer value between
1-5000. This value sets the rule precedence in the ACL.
Advertisement
Table of Contents
