Electric Installation - Electrolux T4900 Installation Manual

24

Electric installation

To be carried out by
qualified personnel
The tumble dryer must be connected to its
own fuse group / circuit breaker group and
main switch according to IEC 60947.
Cable dimension
For calculation of the connection cable
dimension, please refer to local guidelines.
Connecting the cable
1. Demount back plate C with supply
disconnector grip, fig. 1.
2. Lead cable through the cable gland to the
supply disconnector, fig. 2.
3. Connect cable as illustrated. If there is a
neutral conductor it must be connected to
terminal N, fig. 3.
Wiring diagrams
Wiring diagrams for all heating types are
enclosed the drum.
Wiring diagrams for the specific dryer are in
plastic bag D.
Circuit breaker / effect
The sizes of the circuit beaker and the effect
are shown on the following page.
Function check
The function check is described in the back of
this manual.
(NB: Correct direction of rotation is important!)
The tumble dryer must be equipped with
supplementary protection in accordance
with heavy current regulations.
Installation manual
1
C
2
D
3
L3
L2
L1
N