Electric Installation - Electrolux T4130 Installation Manual

Electric installation

To be carried out by qualified personnel
The dryer must be given a fuse group of its
own and switch in accordance with IEC 60947.
For each dryer, a multi-pole permanent switch
is to be placed in the permanent installation. It
must be easily accessible, but there must be
no mistaking it for the operating switch for the
dryer.
The motor features an integrated thermal fuse,
which is why motor protection in the installation
is unnecessary.
Remove the top plate of the dryer to connect
the cable. Install the dryer as a permanent
installation.
See dimensions in the table.
Function check, see next page.
The dryer must be equipped with
supplementary protection in accordance with
current regulations.
External fan
A connection terminal is available for
controlling an external fan.
Cable dimensioning table
Voltage
Type
Standard
400-440V
dryer
200-240V
230-240V
230-240V
Conden-
400-440V
sate dryer
230-240V
230-240V
000-200V
Electric installation
Power-
intake
3N / 3 AC 5,3 kW
3 AC 5,3 kW
3 AC 3,4 kW
1 AC 3,4 kW
3N / 3 AC 3,4 kW
3 AC 3,4 kW
1 AC 3,4 kW
3 AC 3,4 kW
Connection
Ext. connection
of external
Max. 1,25A
contactor
(Does not apply to marine models)
Heating
5,1 kW
5,1 kW
3,2 kW
3,2 kW
3,0 kW
3,0 kW
3,0 kW
3,0 kW
17
Fuse
10A
16A
10A
16A
10A
10A
16A
16A