Removal from transportation pallet
1. Demount back plates and filter door.
2. Knock the two wood boards loose, one in front
and one in the back, with a hammer, fig. 1.
3. Demount the 4 screws holding the bars.
4. Lift the dryer with pallet truck or fork-lift truck
and remove the bars.
5. Mount the four feet in the bottom bearers, fig. 2.
6. T41200 only.
When pallet truck or fork-lift truck is removed the
2 steel sections are disengaged.
Remove steel sections and the remainder from
transportation pallet.
Installation manual
1
2
13