I/O Control Instruction - Planet ICA-3550V User Manual

2.1.2 I/O Control Instruction

1) Please connect the GND and DO pin to the external relay (buzzer) device.
2) Please connect the GND and DI pin to the external trigger device.
3) I/O Pin definition
GND (Ground): Initial state is low
DO (Digital Output): 5V DC
DI (Digital Input): Max. 50mA, 5V DC
4) I/O Setup
Click I/O Setting from the system setup page via IE, and check "Out1" to enable
I/O signal.
5) Output Test
After the external input and output hardware is installed, you can use the "Relay Out" button
on the live video page to test if DO / Relay Out works.
5 Mega-pixel Outdoor IR PoE IP Camera
13
ICA-3550V