Chapter 2. Hardware Interface; Physical Descriptions; Identification Of Ica-3550V Cable - Planet ICA-3550V User Manual

Chapter 2. Hardware Interface

2.1 Physical Descriptions

2.1.1 Identification of ICA-3550V cable

1. RJ45 LAN socket: Connect to PC or Hub/Switch.
Connected to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling, the ICA-3550V with
the Ethernet port built N-way protocol can detect or negotiate the transmission speed of the
network automatically. Please use CAT-5 cable to connect the Network Camera to a 100Mbps
Fast Ethernet network switch or hub.
2. Power Jack: The input power is DC 12V.
ONLY use package power adapter supplied with the Internet. Otherwise, the
product may be damaged.
3. I/O Control Instruction
The I/O terminal connector is used for such applications as motion detection, event triggering,
and alarm notification.
4. Video Output
The internet camera also provides composite video output. User can use BNC video cable to
connect the internet camera with a TV monitor or VCR.
5. Microphone input (audio in)
Connect a microphone to the network camera.
6. Line out (audio out)
Connect a loud speaker to the network camera. This is for voice alert and two-way audio.
5 Mega-pixel Outdoor IR PoE IP Camera
12
ICA-3550V