Installing The Printer Software - Hasler HJ950C Operating Manual

SECTION 2
INSTALLING THE PRINTER

Installing the Printer Software

During this process the M Series Driver and M Series Toolbox utility will be installed onto your computer
system.
NOTE: If you are updating the HJ950C (M Series) printer software (printer driver and toolbox utility);
please be sure to Uninstall the old software before installing the new software. Use the "Uninstall"
feature found on your computer system under All Programs, "Memjet", "M Series Driver".
PROCEDURE
1. Disconnect the USB cable connection from the printer; if you plugged it in already.
2. Insert the CD, supplied with the printer, into your CD drive. If the "Launch Menu" window does
not automatically open in your browser. Locate and run the "MENU_LAUNCH.htm" file, located
on the root directory of the CD.
3. When the HJ950C Operation CD "Launch
Menu" window opens on the computer screen;
Click "Install Printer Software".
NOTE: If you receive a Windows security or
authorization warning, click on "YES" or
"Continue Anyway".
Tip: If you are unable to start the software
installation using the button in the "Launch
Menu": Browse to the CD. Locate and open the
Printer Drivers folder. Located and run
"Install.exe" to start the install.
4. When the License Agreement window opens.
Carefully read the "End User Agreement".
If you agree to the terms, check "I accept..."
then click Next>.
16