Making The Speaker Cable - Zeppelin PERCOLATOR Assembly Instructions Manual

2. Use a screw driver to install the handle, using the screws that came with it.
probably shipped with a different handle than the one shown here.
225
The cabinet is done!
227

MAKING THE SPEAKER CABLE

1. Take the 6" zip wire (Part # CB11) and split the ends about ½" (13mm). Now use your flush or
diagonal cutters and cut off about 3/16" (4-5 mm) from ONE END of the RIBBED wire.
3/16" (4-5 mm) insulation off all four ends. Twist the exposed stranded wire ends,
tin them with the soldering iron.
228
226
227
230
229
69
Your combo
225,226
Cut
228
and then
229