Table of Contents
Advertisement
7. Now remove the tape, fold the same template the other way,
cleat, and mark the five holes.
before.
NOTE: you are making a PAIR of Front Cleats, not two identical ones!
137
135
137
8. Laying out the Cleats (Part # CA06.5&6): Place the Sides face down on your work table, with
the front edges facing each other. Lay out the four cleats, with the long Front Cleats toward the
middle and the shorter Rear Cleats toward the left and right. Compare the "TOP" and "IN"
labels to the photo.
138
ceiling; two marks and the word "IN" should be facing across over the tops of the shorter Rear
Cleats.
Triple-check that you have the cleats oriented correctly to create a pair of mirror-image
139
cabinet sides! Many people find this difficult to visualize, even when the parts are right there, so
if you are unsure, grab the nearest person and ask him or her to check your work.
138
Peel back the template and mark "TOP" and "IN" as you did
136
136
Each long cleat should have three marks and the word "TOP" facing the
139
48
wrap it around the other long
135
Advertisement
Table of Contents
