Table of Contents
Advertisement
WHAT'S IN THE BOX
Table 1: Percolator Combo Bill Of Materials (BOM) is a complete
parts list of everything that should be present in your kit, followed
by photos of each part. Print the BOM and carefully go through
the kit, identifying every part. Note that some of the components
are difficult to tell apart. Compare them carefully with the photos.
Besides verifying that nothing is missing, this will acquaint you
with the parts and their names. If ANYTHING is missing, first
double-check: we double-checked before sealing the box at our lab! If
it's still missing, EMAIL US right away at support@zeppelindesignlabs.com. Include your serial number
(given via a sticker on the chassis) in your email. If we are reasonably convinced that we goofed and
shorted your kit, we will get replacement parts in the mail to you as soon as possible. If you lose or
damage anything, we will be glad to sell you replacements. The unusual or custom components can
be ordered directly from us (contact support@zeppelindesignlabs.com). For more common parts, like
resistors, caps, or screws, you may just want to go to a local electronics or hardware store.
Figure 1: What's In The Box?
Table 1: Percolator Combo Bill Of Materials
Loose in the box:
Part #
Description
BB08
Baffle Board for 8" Speaker
CA06.1
Cabinet Top
CA06.2
Cabinet Bottom
CA06.3
Cabinet Sides
CA06.4
Cabinet Front
CA06.5
Cabinet Cleat - Rear
CA06.6
Cabinet Cleat – Front
the parts of the kit onto a
cookie sheet or into a big fruit
bowl, NOT onto the cluttered
workbench, or onto the living room
carpet! This will protect you from
Notes
Has a big notch
Shorter parts
Longr parts
6
TIP: Empty
losing tiny parts.
Qty
1
1
1
2
1
2
2
Advertisement
Table of Contents
