Zeppelin PERCOLATOR Assembly Instructions Manual page 49

2 watt tube amp / 1x8 combo kit
Hide thumbs Also See for PERCOLATOR:
Table of Contents

Advertisement

9. With the pencil, carefully label each cleat and each side, in a spot where it will not show, so you
can easily put each cleat back in its correct spot.
140
10. Now pick one of the long Front Cleats, and use one of the Port pieces (Part # CA06.7) on edge
as a spacer to space the cleat in from the front edge,
bottom edges.
Note the cleat is cut a little short, so check it at both ends and center it on
142,143
the cabinet side. This is much easier than it sounds. Finally, check the offset from the front edge
once more: it's better to place the cleat a hair too far in
than too far out! Use one or both of your clamps to
hold the cleat securely in place.
NOTE: Take your time on this step! The overall
neatness of the front of your combo depends on
placing this cleat accurately.
141
143
140
and to center it in from the top and
141
144
142
144
49
TIP: See our
online video "1x8 Speaker
Cabinet Assembly"(3:03) for a
demonstration of how easy this is.

Advertisement

Table of Contents
loading

Table of Contents