Installing The Baffle Board - Zeppelin PERCOLATOR Assembly Instructions Manual

2 watt tube amp / 1x8 combo kit
Hide thumbs Also See for PERCOLATOR:
Table of Contents

Advertisement

INSTALLING THE BAFFLE BOARD

1. Use a hot soldering iron to melt a little hole through the grill cloth over the four mounting holes
near the corners of the baffle board.
291
2. Place the cabinet on its back and drop the completed baffle into the front. Orient the baffle so
that the cable is facing toward the amp.
292
3. Poke a #6x1-1/4 wood screw (Part # SC61) through one of the holes and use a screw driver to
turn it a few times, just enough to mark the cleat.
294
=SM161
291
292,293
293
Repeat for all four corners.
294
85

Advertisement

Table of Contents
loading

Table of Contents