Table of Contents
Advertisement
43. Apply glue to the cleats and the underside of the Top, where the Front will touch them.
Front back into place, clamping it to the Top as before.
gun, run four wood screws #6x1-1/4" through the cleats and into the Front.
192
194
44. Re-drill the six little holes in the Ports with the 9/64" bit and countersink them.
195
Glue the LOWER PORT ONLY into place. Apply glue to the cabinet bottom and to the cleats just
where the lower Port will touch them. Fit the lower port back into the cabinet, being careful to
match up your markings.
the cleats with two wood screws.
196
193
Clamp the lower port tight to the cabinet bottom, and screw it tight to
196
Do NOT glue or install the upper port!
197
197
61
Using a screw driver or cordless screw
193
194
195
Fit the
192
Advertisement
Table of Contents
