Table of Contents
Advertisement
c. Sand the three exposed faces of the upper Port and ease the edges.
d. Carefully and thoroughly hand-sand the inside corners around the cutout in the cabinet
top.
207
207
Be thorough! The better job you do here will strongly influence how uniform your stain turns out
later.
2. Remove the dust: blast it with compressed air, draw it off with a shop-vac, or wipe with a clean
rag.
208
208
3. With a clean rag, apply a liberal coat of MinWax Dark Walnut Wood Finish #2716. This is an
oil-based stain, one of the easiest to use. Coat the entire cabinet interior, paying attention to the
inside corners.
209,210,211,212
209
210
65
Advertisement
Table of Contents
