Table of Contents
Advertisement
54
56
b. The power transformer goes on the RIGHT side of the chassis (with the back of the chassis
AWAY from you). Pass the red and brown wires through the rear-right grommet, and the black
wires through the front-right grommet.
the chassis. Use two M3x6 machine screws (Part # SC38) and two M3 keps lock nuts (Part #
NU10) to mount the transformer.
57
59
55
Align the transformer mounting holes with the holes in
57
Screw down tight.
58
59
58
25
Advertisement
Table of Contents
