Maintenance; Maintenance Works - HAKO Scrubmaster E10 Instruction Manual

Maintenance

Maintenance Information
Compliance with our recommenda-
tions concerning maintenance work
will give you the certitude of always
having a machine at your disposal
which is ready to work and in good
operating condition.
It is better to take precautions than to
repair damages - and less expensive!
Please contact your local contract
dealer; the people there will be glad to
perform that work for you. There, well-
trained personnel and genuine spare
parts are at your disposal.
In case of any inquiries or orders for
spare parts, please always quote the
machine's serial number indicated on
the nameplate. The nameplate is
located at the rear of the machine.
Turn the machine off and
disconnect the mains plug
before cleaning or maintain-
ing the machine.
For safety reasons, secure the lifted
tank lid against inadvertently closing or
lowering during all cleaning or mainte-
nance work in or at the tank. Operate
the machine only with all safety
devices being fitted and in protective
position. Do not proceed to cleaning
by hand but use appropriate tools or
auxiliary means. Maintenance or
repair work has to be done using
appropriate tools and by qualified per-
sonnel only. For safety reasons use
genuine spare parts.
Before proceeding to the
maintenance and/or inspec-
tion or repair works men-
tioned in the following, exe-
cute a functional check of
all operating elements and
units in order to detect
eventual failures.
After repair work has fin-
ished, operate the machine
after having performed a
safety check only.
25