Transport - HAKO Scrubmaster E10 Instruction Manual

General Safety Instructions
Make sure to connect the
Hakomatic to a socket
equipped with earthed pro-
tective wire and to mains of
adequate voltage and fre-
quency.
Never collect explosive fluids,
undiluted acids and solvents!
This includes e.g. gasoline,
paint thinners or fuel oil, which - when
penetrating the air being taken in -
may form explosive vapours or mix-
tures; moreover acetone, undiluted
acids and solvents if they should be
aggressive to the material used for the
machine components.
The machine may be used
only on indoor hard floorings
and for operation on level
grounds with a maximum inclination of
up to 2%.
6
Using the machine on public roads
and places is not admitted.
Qualified personnel only are admitted
to perform maintenance and repair
work.
Turn the machine off and disconnect
the mains plug before cleaning and
maintaining the machine, when replac-
ing parts or when change over to
another function.
Do not clean the machine by
means of vapour jet or high
pressure cleaning equipment.
Do not allow water penetrate the elec-
trical parts.
The machine is splash-water proof
(IPX3).
Use of the machine in areas endan-
gered by explosion hazard is not
admitted.

Transport

The front roller of the Hakomatic has
been fitted for parking the machine
only and precludes damages to the
floor. It is thus recommended to lift up
the brush head as represented before
transporting the Hakomatic.