Detergent Infeed; Squeegee Governor - HAKO Scrubmaster E10 Instruction Manual

Description

2 Detergent Infeed

Pump switch
Pumpenschalter
The Hakomatic allows mixing of
G
cleaning lye and fresh water in the
tank. The amount of detergent re-
quired for cleaning can be regulated
by the pump switch. If the switch is
set to position "1" the cleaning lye is
continuously supplied.
12
Slotted Screw for Fitting the Brush
Slotted screw
Disconnect the mains plug before
mounting or dismounting the brush.
Loosen the slotted screw for fitting the
brush before use of the machine and
afterwards for removal of the brush.
Change the brush position after each
use in order to preclude one-side
wearing..
Loosen the slotted screw before dis-
G
mounting the brush from the Hako-
matic.
Dismount the brush from the Hako-
G
matic after every use. Take the ma-
chine into the park position before
dismounting.

Squeegee Governor

Forward
1 Governing handle
2 Front squeegee
3 Rear squeegee
The front or the rear squeegee of the
Hakomatic is lowered and has contact
with the floor. The operator may
change squeegee position according
to the direction of travel of the
machine.
Reverse