HAKO Scrubmaster E10 Instruction Manual page 10

First Operation
3. Open the lateral brush head cover
by loosening the slotted screw using a
coin. Then insert the enclosed brushes
into the housing. The Hakomatic has
been equipped with a slotted screw to
facilitate removal and fastening of the
brushes.
4. After folding of the lid, filling of the
fresh water tank is possible. Before fill-
ing with fresh water, move the support
roller out of its parking position.
10
Make sure that all covers
and flaps have been fitted
before starting operation.
A damaged mains cable has
to be replaced by a specific
cable available at the manu-
facturer or an authorised
service centre.
Slotted screw