Maintenance Instructions - HAKO Scrubmaster B5 Operating Manual

Table of Contents

Advertisement

During operation
• Sturdy and slip-proof shoes must be worn when working with the machine.
• Only those surfaces approved by the contractor or its authorised represent-
ative for use of the machine may be cleaned.
• When working with the machine, pay special attention to third persons,
especially children.
• When driving over thresholds up to 1 cm high, pull the machine over the
threshold in transport position. For thresholds over 1 cm high, lift the
machine by the handle loop and place it over the threshold.
• Only use detergents suitable for automatic machines (foam retarded) and
observe the application, disposal and warning instructions provided by the
detergent manufacturer.
• The machine is not suitable for removing liquids, dusts or materials that are
dangerous to health, combustible or explosive. It is also prohibited to collect
burning objects, e.g. glowing cigarettes. The collection of dry wood dust,
e.g. beech and oak dust, is also prohibited – health hazard!
• The machine must not be used in potentially explosive atmospheres.
• Warning! The machine should only be used on level surfaces with
a maximum slope of 2 %.
• Manipulating the switches and protective devices is forbidden.
1.4

Maintenance instructions

• Daily and weekly maintenance work must be done in accordance with the
maintenance plan by the operating staff. In all other maintenance work,
please contact your nearest Hako service centre.
• The maintenance work and maintenance intervals specified in the
operating manual must be complied with.
• Use suitable tools for the cleaning and maintenance work.
• Have the machine checked for safe condition by an expert in accordance
with the accident prevention regulations at appropriate intervals (we
recommend at least once yearly).
• Spare parts must at least comply with the technical requirements specified
by the manufacturer. This is guaranteed by original spare parts.
• Turn the machine off for cleaning and maintaining the machine as well as
before replacing parts.
• Cleaning the machine with a high-pressure cleaner or steam jet is not
allowed.
• Application of aggressive and corrosive detergents is not allowed.
01-7150-00.fm
Safety instructions
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

7150

Table of Contents