Neogate Tg Series Basic Configurations; Factory Defaults; Logging In The Web Configuration Panel - Yeastar Technology NeoGate TG100 Installation Manual

4. NeoGate TG Series Basic Configurations

4.1 Factory Defaults

NeoGate TG Series provides web-based configuration interface for administrator and account user. The user
can manage the device by logging in the Web interface.
The factory default IP address:
LAN: 192.168.5.150;
Access path: http://[IP address]
User Name: admin;
Password: password
Default SIP UDP port: 5060

4.2 Logging in the Web Configuration Panel

Firstly, please check if the IP address that assigned to the network port (LAN) is in the same segment with the
PC and which can be connected when commit "Ping + NeoGate IP address" command. Start the browser on
PC. In the address bar, enter the IP address, click "Enter" button and then you can see NeoGate Web
Configuration Panel login page (See Figure 4-1).
Enter the Admin User Name and Password to log in.
http://www.yeastar.com
Figure 4-1 NeoGate Web Configuration Panel Login Page
NeoGate TG Series Installation Guide
12/14