Download  Print this page

Hemming With The Cover Stitch; Free Arm Hemming - ELNA 444 Instruction Manual

Hide thumbs



Hemming with the Cover Stitch

z Fold up the edge of the fabric to the wrong side and
x Draw a line with a tailor's chalk on the right side of the
fabric to mark the fabric edge.
c Place the fabric so the left needle drops just to the
left side of the marked line. Lower the presser foot.
v Sew carefully along the marked line.
b After finishing sewing, raise the presser foot and
remove the fabric to the rear.
n Draw the needle threads to the wrong side of the
fabric and knot them together.
q Marked line
w Left needle
e Right needle
r Right side of the fabric

Free Arm Hemming

The extension table can be detached for free arm
hemming on the tubular parts of the garments, such as
sleeves, cuffs etc.
z Detach the extension table (see page 8).
x Stitch the hem in the same way as hemming with
cover stitch.
c Continue to sew over the stitches 2˝ (4 to 5 cm)
beyond the beginning of the seam and stop the
Cut the threads at the beginning and at the end.


Table of Contents

   Also See for ELNA 444

Comments to this Manuals

Symbols: 0
Latest comments: