Straight Stitch (With Dual Feed) - ELNA eXcellence 782 Instruction Book

(2)
(1)
(2)
(3)
(1)
133
Starting over from the corner
Press the startover key before sewing in the new direction
to sew from the beginning of the pattern.
(1) Startover key
Two of startover options are available for applique
stitches. Press the cornering key to select normal
startover or cornering startover.
The key icon will change to show which option is being
selected when pressing the key.
(2) Cornering key
Normal startover:
Sew a locking stitch then start sewing from the beginning
of the pattern.
Cornering startover:
Start sewing from the beginning of the pattern without a
locking stitch.

Straight Stitch (with Dual Feed)

Straight stitches in this section are suitable for seaming
quilt layers using the dual feed foot (refer to page 31
for how to attach it). Refer to page 78 if you wish to use
zigzag foot A with a quilting guide bar.
Quilting guide bar for dual feed foot
The quilting guide bar is helpful when sewing parallel,
evenly spaced rows of stitching.
Insert the quilting guide bar into the hole in the rear of the
foot holder.
Shift the quilting guide bar to the desired spacing.
(1) Quilting guide bar
(2) Hole
Press the dual feed key.
(3) Dual feed key
Sew rows of stitching while tracing the previous row of
stitches with the quilting guide bar.