Table of Contents
Advertisement
w
e
r
q
Hemming with the Cover Stitch
Fold up the edge of the fabric to the wrong side and
press.
Draw a line with a tailor's chalk on the right side of the
fabric to mark the fabric edge.
Place the fabric so the left needle drops just to the left
side of the marked line.
Lower the presser foot lifter.
Sew carefully along the marked line.
After finishing sewing, raise the presser foot lifter and
remove the fabric to the rear.
Draw the needle threads to the wrong side of the fabric
and knot them together.
q Marked line
w Left needle
e Right needle
r Right side of the fabric
Free Arm Hemming
The extension table can be detached for free arm
hemming on the tubular parts of the garments, such as
sleeves, cuffs, etc.
Remove the extension table (refer to page 5).
Stitch the hem in the same way as hemming with cover
stitch (refer to "Hemming with the cover stitch" on page
40).
Continue to sew over the stitches 2˝ (4 to 5 cm) beyond
the beginning of the seam and stop the machine.
Cut the threads at the beginning and at the end.
40
Advertisement
Table of Contents
