Menu level 1
Menu level 2
PARAMETER
SHORTCUTS
DISPLAY
PERSONALITY
(continued)
DISPLAY
INTENSITY
DISPLAY
ROTATION
ERROR MODE
FACTORY
LOAD FACTORY SETTINGS
SETTINGS
FIRMWARE
VERSION
POWER ON TIME
LAMP ON TIME
FIXTURE
INFORMATION
LAMP STRIKES
AIR FILTERS
MAC ID
SERIAL NUMBER
RDM UID
54
Menu level 3
Menu level 4
Off
On
On
2 min.
5 min.
10 min.
Auto
1 - 100%
0° / 90° / 180° /
270° / Auto
Normal
Silent with LED
Vxx.xx.xx
TOTAL POWER ON
RESETTABLE POWER ON
CLEAR RESETTABLE POWER ON
TOTAL LAMP ON
RESETTABLE LAMP ON
CLEAR RESETTABLE LAMP ON
TOTAL LAMP STRIKES
RESETTABLE LAMP STRIKES
CLEAR RESETTABLE LAMP STRIKES
RESETTABLE AIR FILTER
SET TIME ALERT
CLEAR RESETTABLE AIR FILTER
xx.xx.xx.xx.xx.xx
(xx)xxxxxxxxxxxx
xxxx.xxxxxxxx
Table 2: Control menus
MAC III Profile user manual
Notes (Default settings in bold print)
Effects avoid open positions during effects
changes
Effects take shortest route during
changes, crossing open positions if
necessary.
Display permanently on
Display goes into sleep mode 2 minutes
after last key press
Display goes into sleep mode 5 minutes
after last key press
Display goes into sleep mode 10 minutes
after last key press
Display auto-adjusts to ambient light level
Manually set display intensity
Rotate display manually or set to
auto-rotate to match fixture orientation
Enable error messages and warnings in
display
Disable error messages and warnings in
display (the LED in the jog wheel will still
light to indicate fixture status if an error
has been detected or the fixture has a
warning)
Return all settings (except calibrations) to
factory defaults
Fixture software version
Display hours fixture has been powered on
since manufacture (not user-resettable)
Display hours fixture has been powered on
since last counter reset (user-resettable)
Reset RESETTABLE POWER ON counter
to zero.
Display hours of lamp use since
manufacture
(not user-resettable)
Display hours of lamp use since last
counter reset (user-resettable)
Reset RESETTABLE LAMP ON counter
to zero.
Display number of times lamp has been
struck since manufacture (not
user-resettable)
Display number of times lamp has been
struck since last counter reset
(user-resettable)
Reset RESETTABLE LAMP STRIKES
counter to zero.
Display hours fixture has been powered on
since timer was last cleared.
Set alert timer from 0 - 750 hours.
Resets AIR FILTER timer to zero.
Fixture's MAC address
Fixture's serial number (set at factory)
Fixture's unique RDM ID
Need help?
Do you have a question about the MAC III Profile and is the answer not in the manual?
Questions and answers