Chapter 2
Installation
The hub does not require software configuration, and is ready to work by
simply attaching the cables and power adapter. This chapter provides
information and procedures to install the unit.
Verifying the Package Content
Before you start installation, please check the contents of the package. The
product package should include the following:
One FastHub8 or FastHub16 unit
Accessory bag containing rubber feet and bumpers for desktop
placement, and screws for wall mounting the unit
A two-piece AC Power adapter (DC 5V) consisting of a country specific
AC receptacle cord and universal power supply
This installation guide
Warranty Card
If any item is missing, please contact your Allied Telesyn representative. Allied
Telesyn locations can be found in Appendix D on page 19.
5