Table of Contents
Advertisement
Chapter 3: Getting Started
3.5 Using PTZ Controls
If you are using a PTZ speed dome camera, you can configure the PTZ control settings.
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select PTZ.
Note:
This option is not available if the PTZ camera is in Cruise mode. See
3
The PTZ control panel appears on the screen.
Note:
To change the PTZ settings, see
No.
Icon
1
2
3
-
4
5
6
7
8
-
9
-
10
11
DVR User's Manual
36
"4.6.2 PTZ Setup" on page
1
2
Item
Channel Select
Click to select the channel of the PTZ camera.
Pointer pan
Click the direction arrow to select the direction of the PTZ camera.
Click the middle icon to switch to auto pan mode.
Zoom
Click to zoom in/out.
Focus
Click to adjust the focus.
Iris
Click to adjust the iris setting.
Time
Set a preset time.
Save
Click to save the settings and preset points.
Clear
Click to delete the selected preset.
Set Preset Point
Click to set a specific preset point on a PTZ camera.
Note:
You can set up to 255 preset bits for the DVR. However, the actual preset
quantity varies depending on the PTZ camera performance.
Go to Preset Point
Click to go to a specific preset point.
Total
Display the total of preset bit.
No.
Set a preset point.
Speed
Click to adjust the speed.
"4.6.2 PTZ Setup" on page 60.
60.
11
10
9
3
4 5
6
Function
8
7
Advertisement
Table of Contents
