Ptz Setup; Ptz Control - KGuard Security KG-SHA104 User Manual

KGUARD Standalone DVR KG-SHA104/108 User Manual

4.2.4.4. PTZ Setup

Select the channel you want to control and set PTZ (Pan Tilt Zoom) protocol (Pelco-D or Pelco-P),
Baud Rate (1200, 2400, 4800, and 9600), Stop bit (1, 2), Parity Check (None, Odd, Even Mark
Space), Address Code and Cruise status respectively. Please note the above mentioned channel
settings must match the settings of the PTZ camera.

4.2.4.5. PTZ Control

You can find the PTZ control menu on the pop-up menu bar and open the PTZ control
interface. You can click Z+ & Z- keys to zoom In or out, click F+ & F- keys to control
camera focus and click I+ & I- to adjust the focus point.
Open auto cruise function on PTZ setting menu if you want to setup cruise function, and set up cruise channel, cruise
point, total quantity and stop time (by second) etc.
Channel: select the channel with the PTZ camera
TOTAL: set up presetting bit (angle) quantity. Please refer to your camera's manual for detail
CUR POINT: System has default starting (current) cruise point as 01. You can use this option to set additional cruise
points
STOP TIME: sets the dwell time at each cruise point
GOTO: Select this option to go to specific preset points
33
www.kguardsecurity.com