Record Setup; Record Parameter - KGuard Security NS401 User Manual

8
Click the right mouse button to close the Select Mask screen.
9
After all settings are complete, click Apply.
10
When data saving is complete, click OK.
« TIP »
To copy the privacy zone setting to other channels, select the channel(s) in Copy To, then click Copy.

4.2 Record Setup

With RECORD menu, you can customize the recording settings, set the recording schedule and framerate.

4.2.1 Record Parameter

1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu
3
Modify the necessary settings.
Menu item Description
Channel Select the channel that you want to configure.
Record Enable/Disable record mode.
Pack
Set the elapsed time per recording (15 Min/30 Min/45 Min/60 Min).
Duration
PreRecord Enable/Disable recording prior to motion detection recording is triggered.
Copy To Copy the current settings to all channels or one specific channel.
4
After all settings are complete, click Apply.
5
When data saving is complete, click OK.
> RECORD.
Chapter 4: Using the DVR
Masked area
DVR User's Manual
43