Ptz Camera - KGuard Security KG-SH122E.V2 User Manual

KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware)
Audio output
Alarm inputs
Alarm outputs
Ethernet
I/R remote
controller
Connect the RS-485 connector to PTZ camera(s) via the appropriate cable. The system
supports a variety of different PTZ cameras, including Pelco D protocol Dome, SamSung
SCC-641P, Kalatel Cyber Dome, Bosch AutoDome, etc.
But different PTZ cameras can coexist in a system only if they support the same
protocol.
Please make sure to set the PTZ ID of the camera(s), and setup the camera and
RS-232 or RS-422/485 accordingly.
cameras or other audio sources.
Connect the audio output connector to the audio line-in from
speakers
Connect the alarm inputs to NC and/or NO type of alarm signals.
Connect the alarm output #1 to NC type of alarm signal, or alarm
output #2 to NO type of alarm signal.
Please note that only one of the NC or NO connectors can be
connected only.
Connect the Ethernet connector to a standard twisted-pair Ethernet
cable for remote access via LAN or internet.
The user may use I/R remote controller to control the digital
video/audio recorder

PTZ CAMERA

All rights reserved
17
www.kguardsecurity.com