Manual Recording; Adjusting Volume - KGuard Security NS401 User Manual

Chapter 3: Getting Started

3.7 Manual Recording

With this function, you can manually record the video. The system will continuously record the video until you
manually stop the recording.
To enable manual recording:
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Start Record.
The video recording starts.
To stop the manual recording:
1
Right-click on the mouse to display the Pop-up menu.
2
Select Stop Record.
The video recording stops.
Note:
This function is available only if record mode is set to schedule. See

3.8 Adjusting Volume

You can adjust or mute the output volume while viewing the channels on a monitor.
To adjust the volume:
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Volume.
3
Drag the slider to adjust the volume. Or, select MUTE to mute the audio.
4
Select the Save button to save the volume setting.
DVR User's Manual
38
"4.2 Record Setup" on page 43.