Panasonic KX-TVM50 Feature Manual page 101

4.
Enter the extension number.
5.
Confirm the entry is correct, then press [2] to accept it. Go to Step 10.
Note
• Press [1] to change the extension number—Return to Step 4.
6.
Press [1] or [2] to select telephone number 1 or telephone number 2 (go to Step 8), or press
[3] to select another telephone number.
7.
Enter the telephone number using "0-9" and " ".
Note
• Please make sure you begin the telephone number with a Trunk Access number (to seize a
trunk).
• When connected to the KX-TD500 or the KX-TDA series, the maximum number of
characters allowed to be entered is 24; when connected to any other KX-T series PBX, 16.
8.
Confirm the entry is correct, then press [2] to accept it. Go to Step 10.
Note
• Press [1] to change the telephone number. Return to Step 6.
9.
Call Forwarding is cancelled. Press [2] to accept it.
10.
The new settings are transmitted to the PBX. If the forwarding setting or cancelling has been
completed properly, you will hear: "Call forwarding accepted" or "Call forwarding is cancelled".
Note
• If the VPS announces, "Call Forwarding not accepted. Please check the destination
number", the forwarding setting has not been completed properly at the PBX, possibly
because a nonexistent extension number has been entered as the destination. It is also
possible that the model of the connected PBX does not support the Remote Call Forwarding
Set feature, or its software version is lower than required. For more information, consult your
dealer.
3.2 Message Manager's Guide
Feature Manual 101