Using System Startup; Step 1-Assigning A Hostname - Nokia IP100 Series Installation Manual

Using System Startup

Step 1—Assigning a Hostname
IP100 Series Installation Guide
When you first boot up an IP100 Series NAP, the console screen displays
miscellaneous information (such as memory checks). The following text
(Figure 3-1) then displays on your screen:
Syncing disks... done
Rebooting...
Verifying DMI Pool Data.....
1 Bootmgr
2 IPSO
Default: 1
Figure 3-1. Screen that appears when first booting the NAP
Do nothing when you see this screen. After five seconds the system
startup procedure automatically starts.
System startup first requests a hostname for the NAP.
At the Hostname? prompt do the following:
A.
Type a hostname. You can use any alphanumeric characters in
upper or lower case (a-z, 0-9), dashes (–), and dots (.). What you
type is case sensitive so every time you enter your hostname you
must enter it in exactly the same way.
B.
Confirm your entry by re-entering it.
Using System Startup
29