Alarm Output Port - Eclipse Security Tribrid User Manual

3.6.3 Alarm Output Port


Provide external power to external alarm device.

To avoid overloading, please read the following relay parameters sheet carefully.

RS485 A/B cable is for the A/B cable of the PTZ decoder.

T+,T-,R+,R- are four-wire double duplex RS485 port.
T+ T-: output wire
R+ R-: input wire
JRC-27F
Model:
Material of the Silver
touch
Rating Rated switch capacity
（Resistance
Maximum switch power
Load）
Maximum switch voltage
Maximum switch currency
Insulation Between touches with same
polarity
Between touches with different
polarity
Between touch and winding
Between touches with same
Surge voltage
polarity
Length of open 3ms max
time
3ms max
Length of close
time
Longevity Mechanical
Electrical
Temperature -40℃ ~+70℃
HDCVI Standalone DVR User's Manual
Figure 3-2
Relay Specification
30VDC 2A, 125VAC 1A
125VA 160W
250VAC, 220VDC
1A
1000VAC 1minute
1000VAC 1minute
1000VAC 1minute
1500V (10×160us)
50×106 times (3Hz)
200×103 times (0.5Hz)
50