Eclipse Security Tribrid User Manual page 111


Max connection: system support maximal 128 users. 0 means there is no connection
limit.

TCP port: Default value is 37777.

UDP port: Default value is 37778.

HTTP port: Default value is 80.

HTTPS port: Default value is 443.

RTSP port: Default value is 554.
Important: System needs to reboot after you changed and saved any setup of the
above four ports. Please make sure the port values here do not conflict.
4.10.2.3 WIFI
The WIFI interface is shown as below. See Figure 4-64.

Auto connect WIFI: Check the box here, system automatically connects to the
previous WIFI hotspot.

Refresh: You can click it to search the hotspot list again. It can automatically add the
information such as the password if you have set it before.

Disconnect: Here you can click it to turn off the connection.

Connect: Here you can click it to connect to the hotspot. System needs to turn off
current connection and then connect to a new hotspot if there is connection of you
selected one.
HDCVI Standalone DVR User's Manual
Figure 4-63
102