Eclipse Security Tribrid User Manual page 223

Please refer to the following sheet for detailed information.
Parameter Function
This function is disabled by default. Check the box here to enable
Enable
this function so that you can control the zero-channel encoding
function at the WEB.
Compression System default setup is H.264. You can set according to device
capability.
The resolution value may vary due to different device capabilities.
Resolution
Please select from the dropdown list.
The frame rate value may vary due to different device capabilities.
Frame rate
Please select from the dropdown list.
The default setup is 1024Kb/S. The bit rate value may vary due to
Bit Rate
different device capabilities and frame rate setups. Please select
from the dropdown list.
5.8.5.3 Video Matrix
The interface is shown as in Figure 5-81.
Here you can set video output channel and interval.
HDCVI Standalone DVR User's Manual
Figure 5-80
Figure 5-81
214