Eclipse Security Tribrid User Manual page 159

4.10.5.2.3 Tour
Here you can activate tour function. Click Setup button, you can see an interface shown
as in Figure 4-127

Enable tour: Highlight box here to enable this function.

Interval: System supports 1/8/-window tour. Input proper interval value here. The
value ranges from 5-120 seconds. It is for schedule tour/alarm/motion detect tour.

Split: You can select window split mode from the dropdown list.

Channel group: It is to display all channel groups on current split mode. You can edit
and delete a channel group here. Double click an item in the list; you can edit its
channel group setup. Right now system max supports 32.

Add: Under specified window split mode, click it to add channel group.

Delete: Click it to remove selected channel group.

Move up: Click it to move current selected channel up.

Move down: Click it to move current selected channel down.

Default: Click it to restore default setup.
Tips:

Use mouse or Shift button to switch
means the tour funciton is enabled and
HDCVI Standalone DVR User's Manual
Figure 4-126
and button to enable /disable tour.
meas tour funciton is disabled.
150