Eclipse Security Tribrid User Manual page 222

5.8.5.2.3 Tour
The tour interface is shown as in Figure 5-79. Here you can set tour interval, split mode,
motion detect tour and alarm tour mode.
Please refer to the following sheet for detailed information.
Parameter Function
Check the box here to enable tour function.
Enable tour
Here is for you to adjust transparency. The value ranges from 5 to
Interval
120s. The default setup is 5s.
Here you can set window mode and channel group. System can
Split
support 1/4/8/9/16/25/36-window according to device channel
amount.
Here you can set motion detect tour/alarm tour window mode.
Motion
System supports 1/8-window now.
tour/Alarm
tour
5.8.5.2.4 Zero-channel Encoding
The interface is shown as in Figure 5-80.
HDCVI Standalone DVR User's Manual
Figure 5-78
Figure 5-79
213